I recently shared the tutorial of how I made the beaded chandelier in this photo, and have since been asked where many items are from in our room, so I thought I would put all of that info here for easy access! If I missed something you are curious about, please let me know.

If the exact item is available, it is directly linked. If it is no longer available or not available online, similar items were found or the store was listed.

Bedroom:

Rug 

Bed- From Joss and Main, but this one is no longer on the site, but THESE are similar

Bedding- I purchased from Joss and Main, but found it cheaper linked here

Pillows–  Lumbar– The others were found at local fairs/stores

Chandelier- DIY HERE, stemmed from THIS original.

Bamboo Shades

Nightstands– ( I painted the tops and added shelves on the bottom

Hanging Crystal pendants– From Lamps Plus, but are discontinued. THIS ONE is similar and very pretty!

Vase– Hobby Lobby (Tip- Hobby Lobby rotates when certain items go on sale for 50% off, wait until it is on sale to purchase, as with all HL items!) – Alternative found HERE 

Lavender Stems– Hobby Lobby, but alternatives found HERE 

White Trays– Hobby Lobby, but alternatives found HERE.

Books– Used bookstore

Beaded tassel– DIY, but similar found HERE.

Corbels– Hobby Lobby, alternative found HERE.

Wicker Basket– Hobby Lobby, great alternatives found HERE

Faux Olive Tree- DIY- Tutorial coming soon

Baskets holding the faux trees– Homegoods

Jewelry Armoire- It was my mom’s that I painted; nice alternative HERE 

Office:

Barn Doors- DIY

Office Striped Curtains– DIY

Chairs– From Marshalls, but HERE and HERE are similar ones

Wooden Side table- Homegoods – I couldn’t find a great alternative that wasn’t $$$

Jute Rug– World Market, no longer on the website, so HERE is an alternative

Office Chandelier 

Thank you for stopping by!

The post Shop Our Bedroom appeared first on Living with Lady.

I recently learned a new light trick from Brooke at Nesting with Grace, and I just had to pass along the goodness.

I HAD to! It’s too good not to.

We all know hardwiring lighting is a real pain, especially when there isn’t any wiring in the wall to begin with, leaving lighting options a bit limited… normally.

But, with just a little battery and remote-operated light, the options suddenly become much greater.

The spaces above our windows have always been oddly large and I have slowly been trying to find ways to make them look more proportionate.

We started by putting these blinds over the window and hung them much higher than the actual window to make it appear longer, and then we added some curtains to make the windows appear wider.

I always wished we had put the curtains a little bit higher as there was still a bigger space I didn’t like until I came across the light trick. Now I am glad we didn’t!

I bought two sconces for a screaming deal (here) and then bought a three-pack of hockey-puck lights (the smaller kind, here) and that is all I needed. Update- The sconces appear to be sold out at the moment, but a similar sconce can be found HERE.

These particular sconces were plug-ins, but being above windows I couldn’t have the cords hanging down, so my husband cut the wire in the back and then I simply attached the light to where the light bulb would normally be with the double-sided sticky circle the lights came with.

(Photo showing puck light attached to where the bulb would normally go)

THAT IS IT!

Then, we hung the lights and were done! The remote turns them on and off, and you can also push the center of the light to turn them on as well (like a button).

The lights give off a nice, subtle glow, so if you are looking for a bright light to light up an entire room, this isn’t what you are looking for. But man, it sure was easy and I personally love the look!

What do you think? Would you try this in your own home?

(If you want to see the lights in action you can check out my saved Instagram stories. If you end up doing this, please show me and tag Nesting With Grace in your photos! We would love to see!

The post Battery and Remote-Operated Light Trick appeared first on Living with Lady.

Something I have been wanting to do for a while now thanks to my secret BFF, Joanna Gaines, is to add shiplap to our home. I didn’t really know where to put it, though, until one day I was sitting on the couch and noticed how much empty drywall we have due to our tall ceilings. It just kind-of made things look a little “blah” since I can’t really decorate that high up.

That’s when I realized shiplap would do the trick. Not only do I love how it brightens a room, but it gives so much texture and personality. So, knowing how much I wanted to do this, my husband made it happen for my birthday. Below is a tutorial for just how we made it happen for CHEAP, and the tips and tricks we suggest to save you time and money!

Materials:

Underlayment (We bought eight 4×8 sheets at approximately $4/board and had leftover)

Trim (1″ 90 degree)

Sandpaper or Random Orbital Sander (sander is much faster- we used 100 grit paper)

Paint in color of choice (We bought a gallon of Behr “Dove White” and had some leftover)

Roller brush and foam insert

Painting tray

Miter saw or skill saw (we recommend miter saw)

Square and tape measure – to take accurate measurements if you have any angles like we did

Stud finder

Lazer level (optional)

Pin nailer gun and 1.5″ pin nails

Nickels

Jigsaw – optional (If going around outlets or light fixtures)

Spackle/ joint compound and putty knife  (optional if you need/want to fill in the lines/nail holes)

Some before photos…

TIP: We originally bought these 8′ MDF boards but quickly realized this was not the way to go. They were too thick, plus quite a bit more than using underlayment. We had read mixed reviews about underlayment, but we ultimately decided to give it a try. We really could not beat the price.

Directions: 

So, back to Home Depot we went, and we bought eight of these underlayment boards and the best part is that the nice people at Home Depot ripped the boards (cut them) at our desired widths (8 inches) for FREE! This was a huge time-saver and was so nice to have done for us.

Shopping buddies.

Once home, we sanded the raw edges of the boards using a random orbital sander. You can still sand them down without one of these, but you will save a ton of time and energy if you do have one.

Trick! We found we could save a lot of time during the painting phase by stacking all of the boards up and then painting all of the sides at once.

Then, I stood on the inside of the two tables and my husband on the other and we busted the tops out in no time.

Because we weren’t dealing with straight lines, using a square along with a tape measure helped us to calculate the exact angle we needed to cut our boards.

Then, we took our stud finder to locate the studs and used a laser level to help draw straight lines all the way up so when attaching the boards we knew exactly where to nail them into.

My husband then used a miter saw to cut the boards, and we then attached them using the nail gun on the lines we previously drew. 

To evenly space the boards, we used nickels! This made sure the boards stayed consistent throughout.

Each board got two nails, aligning with each of the previously drawn lines.

Going around the outlet and light fixtures required a few more steps. Definitely measure twice, and cut once! And my husband used a jigsaw to do this.

Once all of the boards were on, we attached the trim piece, again using the nail gun.

And that gave it a much cleaner look!

While I wasn’t looking, my husband drew this on the wall before attaching a couple of boards to cover it up. Since this project was a birthday gift, we will always remember it by knowing this is hidden beneath. Totally swooning! He didn’t show me until we were done. And how cool for someone to potentially find some day?

And this portion, complete!

Now on to the top portion. Crazy how different angles and lighting can make the boards look so different. Anyway, we attached the top boards just like the bottom.

TIP: And here is where it might save you some work! We didn’t really have a plan as to how the boards would go up in terms of placement on the top portion. Since the boards weren’t long enough to go all the way across as they were on the bottom portion, they had to be pieced together. So, that is what we did.

And it was about at this point that we decided we didn’t like it! Because we liked the way the bottom portion of the ship-lapped wall looked, with all of the boards reaching all the way across without being pieced together, we thought it looked strange for the top half of the wall to be pieced together once the boards no longer reached all the way across. You can see the various seams if you look closely in this photo.

So, we took all of the boards from this point up, off, and re-did them so that there was only one solid seam at the top of the staircase. Save yourself the work! Plan ahead

Because the wall is so high, my husband built this platform out of scrap wood we had in our garage so that his ladder would be able to safely reach the top of the wall.

And in this picture, you can see where our new seam is.

Now, I was NOT getting on that ladder, so this was ALL my husband, but he did weave the cord around the ladder, giving himself an anchor, which made me breathe a little easier when he was up there.

And finally, putting the trim on the edge with the nail gun.

Once all of the boards were up, we then used some spackle to fill in the seams. Once dry, we sanded it down, and then painted over the line.

TIP! Make sure you do the spackling well! I initially just slapped it up there, sanded it down to what I thought was “good enough” and then painted over it. It looked bad! And ultimately had to be redone.

But, once done, I was in LOVE! We added some new fixtures and it was everything I had hoped for.

TIP!! Use some heavier duty spackle when/if filling in any lines or holes, as what we used the first time fell out! And that line was back… Really, the line didn’t look bad. But I just had it in my mind that I needed to cover it up.

So, this time I filled it in with some heavier spackle.

Used the sander to sand it down…

And then re-painted, and finally, the wall was complete and is probably one of my favorite elements of the entire house!

After!

It really brightens our room immensely and gives off a nice texture.

And, the lights! Oh, I love the lights. I got them from HERE  for a great price, and I love the contrast they give against the white walls.

TIP! We had a hard time finding lighting that looked just right in these fixtures. Regular bulbs were either too bright or yellow, and the Edison bulbs looked too orange. We ended up investing a little more and got THESE bulbs, which you can custom create their brightness, and once we did this they were PERFECT and just what I was looking for.

Pictures with overhead lights turned on and fixtures turned off, and vice-versa, as well as some before and afters:

I hope this has helped those of you who are considering doing this to your own home. I highly recommend it and it didn’t cost us much at all! If you have any questions, don’t hesitate to ask!

The post DIY Shiplap Tutorial (With Time-Saving Tips and Tricks!) appeared first on Living with Lady.